(주)노바인스트루먼트

제품소개 Products

가스, 환경, 기상

온도 적외선 온도 습도, 노점, 수분 압력 유속, 유량 가스, 환경, 기상 전기 데이터저장, DAQ 컴프레셔 압축공기 KOLAS 인정설비

설치형 범용 가스측정기 모델명: XNX Universal Transmitter

► an extremely flexible transmitter

► It can also be configured to provide a wide variety of industry

standard output signals

► most effectively address the different gas detection applications on site

제품 카달로그

견적문의

제품특징

상세사양

Flexible
Compatible with all Honeywell Analytics
gas sensors
Allows selection of best sensor
technology for each application
Choice of all industry standard output signals
Ability to adapt configuration as site
needs change
Future-proofed for any new output standards
Common Transmitter Platform
Simplified and reduced cost of installation
Reduced training time and cost
Less chance of misinterpreting messages
Less chance of incorrectly changing settings
Reduced maintenance, spares, stock and cost
Global Approvals
European, US and Canadian
Compliant with ATEX, UL and CSA standards
ATEX, UL and CSA performance approval
IEC61508 SIL 2
Easy to Use
Easy read multilingual backlit LCD with text, bar graph, digits and icons
Local or remote sensor mounting options
Selectable sink, source or isolated 4-20mA output to suit preferred wiring topology
HART® communications as standard for remote diagnostics/configuration
Reduced Operational Costs
Fully configurable via non-intrusive magnetic switches
No hot work permit needed
Hot swap toxic and Oxygen sensor cartridges
Serviceable catalytic and IR sensors
Auto-inhibit during maintenance Friendly Installation
Integral surface mounting lugs or optional pipe or ceiling mounting brackets
5 x M25 or ¾” NPT cable/conduit/sensor entries
Plug-in ‘POD’ module removes to give access to terminal area
Removable plug/socket type terminal blocks for ease of wiring
Typical Applications
Offshore oil and production platforms
Oil and gas exploration and drilling
Refineries
Chemical and petrochemical plants
Onshore oil and gas terminals
Gas transmission
Power stations

XNX Transmitter
Use	High specification universal transmitter for use with a wide range of Honeywell Analytics local or remote gas detectors for the detection of flammable, toxic and Oxygen gas hazards. Suitable for use in Zone 1 and 2 or Zone 21 and 22 hazardous areas, and North American Class I and II Division 1 or 2 areas.
Construction
Material	Housing: 5-coat marine finish painted aluminium alloy or 316 stainless steel
Weight (Approx.)	Aluminium alloy: 2.8kg (6.2lbs). 316 stainless steel: 5kg (11lbs)
Mounting	Surface mount via integral mounting lugs. Optional pipe mounting kit suitable for Ø100mm to 150mm (Ø4” to 6”) pipe. Optional ceiling mounting bracket
Entries	5 conduit/cable entries (2 right, 2 left, 1 bottom). Entry size M25 for ATEX/IECEx versions or ¾"NPT for UL/CSA certified versions
Dimensions	160mm x 197mm x 114mm (6.1" x 7.8" x 4.5")
Environmental
IP Rating	IP66 in accordance with EN60529:1992. NEMA 4X
Operating Temperature	-40ºC to +65ºC (-40ºF to +149ºF)
Operating Humidity	0-99%RH (non condensing)
Operating Pressure	90-110kPa
Storage Conditions	-40ºC to 75ºC (-40ºF to 167ºF), 0-99% non-condensing
Electrical
Input Voltage Range	EC and mV versions 16 to 32Vdc, IR version 18 to 32 Vdc (24Vdc nominal)
Max Power Consumption	XNX EC (Toxic): 6.2 watts XNX mV (Catalytic or IR cell): 6.5 watts XNX IR with Searchpoint Optima Plus: 9.7 watts XNX IR with Searchline Excel Receiver: 13.2 watts
Current Output	Fully configurable isolated 4-20mA & HART® output module providing current sink, current source and isolated modes of operation (supports HART® 6.0 protocol) supplied as standard
4-20mA Signal Accuracy	+/-1% Full Scale
Terminals	Cage style pluggable with retaining screws for wire diameter 0.5mm2 to 2.5mm2 (approx. 20AWG to 14AWG)
Certification
European	ATEX: II 2 (1) G Ex d [ia IIC Ga] IIC T4/T6 Gb II 2 (1) D Ex tb [ia IIIC Da] IIIC T85 Db
International	IECEx: Ex d [ia IIC Ga] IIC T4/T6 Gb Ex tb [ia IIIC Da] IIIC T85 Db
North American	UL: Class I, Div 1, Groups A, B, C, and D; Class II, Div. 1 Groups F & G / Class 1, Zone 1 Groups IIB + H2; Class II, Zone 20 & 21 FM: AEx D [ia IIC] IIB + H2 T6 -40°C ≤Tamb ≤65°C
Canadian	CSA: Class I, Div 1, Groups B, C, and D; Class II, Div. 1 Groups F & G / Class I, Zone 1 Groups IIB + H2
EMC	EN50270:2006 EN61000-6-4:2007
Performance	Europe – ATEX, EN45544, EN50104, EN50271:2010, EN13980, EN60079-29-1 North America – UL 913, UL 1203, CSA 22.2 No. 152 IEC61508 (SIL Assessment, SIL 2), IECEx OD 005

목록으로

► an extremely flexible transmitter

XNX Transmitter

Use

High specification universal transmitter for use with a wide range of Honeywell Analytics local

or remote gas detectors for the detection of flammable, toxic and Oxygen

gas hazards. Suitable for use in Zone 1 and 2 or Zone 21 and 22 hazardous areas,

and North American Class I and II Division 1 or 2 areas.

Construction

Material

Housing: 5-coat marine finish painted aluminium alloy or 316 stainless steel

Weight (Approx.)

Aluminium alloy: 2.8kg (6.2lbs). 316 stainless steel: 5kg (11lbs)

Mounting

Surface mount via integral mounting lugs. Optional pipe mounting kit suitable

for Ø100mm to 150mm (Ø4” to 6”) pipe. Optional ceiling mounting bracket

Entries

5 conduit/cable entries (2 right, 2 left, 1 bottom).

Entry size M25 for ATEX/IECEx versions or ¾"NPT for UL/CSA certified versions

Dimensions

160mm x 197mm x 114mm (6.1" x 7.8" x 4.5")

Environmental

IP Rating

IP66 in accordance with EN60529:1992. NEMA 4X

Operating Temperature

-40ºC to +65ºC (-40ºF to +149ºF)

Operating Humidity

0-99%RH (non condensing)

Operating Pressure

90-110kPa

Storage Conditions

-40ºC to 75ºC (-40ºF to 167ºF), 0-99% non-condensing

Electrical

Input Voltage Range

EC and mV versions 16 to 32Vdc, IR version 18 to 32 Vdc (24Vdc nominal)

Max Power Consumption

XNX EC (Toxic): 6.2 watts XNX mV (Catalytic or IR cell): 6.5 watts XNX IR with Searchpoint Optima Plus: 9.7 watts XNX IR with Searchline Excel Receiver: 13.2 watts

Current Output

Fully configurable isolated 4-20mA & HART® output module providing current sink,

current source and isolated modes of operation (supports HART® 6.0 protocol)

supplied as standard

4-20mA Signal Accuracy

+/-1% Full Scale

Terminals

Cage style pluggable with retaining screws for wire diameter 0.5mm2 to 2.5mm2

(approx. 20AWG to 14AWG)

Certification

European

ATEX: II 2 (1) G Ex d [ia IIC Ga] IIC T4/T6 Gb II 2 (1) D Ex tb [ia IIIC Da] IIIC T85 Db

International

IECEx: Ex d [ia IIC Ga] IIC T4/T6 Gb Ex tb [ia IIIC Da] IIIC T85 Db

North American

UL: Class I, Div 1, Groups A, B, C, and D; Class II, Div. 1 Groups F & G / Class 1,

Zone 1 Groups IIB + H2; Class II, Zone 20 & 21

FM: AEx D [ia IIC] IIB + H2 T6 -40°C ≤Tamb ≤65°C

Canadian

CSA: Class I, Div 1, Groups B, C, and D; Class II, Div. 1 Groups F & G / Class I,

Zone 1 Groups IIB + H2

EMC

EN50270:2006 EN61000-6-4:2007

Performance

Europe – ATEX, EN45544, EN50104, EN50271:2010, EN13980, EN60079-29-1 North America – UL 913, UL 1203, CSA 22.2 No. 152 IEC61508 (SIL Assessment, SIL 2), IECEx OD 005

XNX EC (Toxic): 6.2 watts
XNX mV (Catalytic or IR cell): 6.5 watts
XNX IR with Searchpoint Optima Plus: 9.7 watts
XNX IR with Searchline Excel Receiver: 13.2 watts

Europe – ATEX, EN45544, EN50104, EN50271:2010, EN13980, EN60079-29-1
North America – UL 913, UL 1203, CSA 22.2 No. 152
IEC61508 (SIL Assessment, SIL 2), IECEx OD 005