제품소개 Products
다기능 온도 교정기
다기능 온도 교정기
다기능 온도 교정기
다기능 온도 교정기
다기능 온도 교정기 모델명: MC6

►The Beamex MC6 is an advanced, high-accuracy field calibrator

   and communicator.

► It offers calibration capabilities for pressure, temperature and

    various electrical signals.

► The MC6 also contains a fieldbus communicator for HART,

    FOUNDATION Fieldbus and Profibus PA instruments.

제품 카달로그
견적문의
제품특징
상세사양

Meter

Meter mode is designed for the simple and easy measurement of signals. Oftentimes, you may need to measure something quickly and easily. Often a simple multi-meter is used for this purpose, as it is easy to use. Some multifunctional calibrators are too slow and difficult to use, so it is easier to just choose a simpler meter. Meter mode in MC6 is optimized for this type of simple metering.

 

Calibrator

Calibrator mode is designed for calibrating various process instruments. Oftentimes, you need to check and calibrate a certain process instrument/transmitter. Transmitters typically have an input and an output. So you either need to have two devices, or a device capable of doing two things simultaneously. Calibrator mode in MC6 is optimized for this type of use.

 

Documenting Calibrator

Documenting Calibrator mode, working together with calibration software,  is designed for process instrument calibration and documentation of the results. In today’s process plant, calibrations often must be documented. Without a documenting calibrator, documentation must be done manually, which takes a lot of precious time and is prone to error. The documenting calibrator mode in MC6 is optimized for use as a documenting process calibrator.

 

Data logger

The data logger is designed for logging various measurement results. There is often a need to measure signals for certain periods and to save the results in a memory for later analysis. This may be related to troubleshooting, surveillance, or calibration. The data logger mode in MC6 is optimized for this type of use.

 

Communicator

Communicator Mode is designed to communicate with Fieldbus instruments. In today’s process plants, smart instrumentation is being used to an increasing degree. Therefore, engineers need to use communicators or configuration software. Most of this instrumentation is HART, FOUNDATION Fieldbus or Profibus PA. The communicator mode in MC6 is optimized for this communication.

 

Settings

The settings mode allows you to edit the calibrator’s various settings to fit your needs.

목록으로