제품소개 Products
COMPARISON FURNACE
COMPARISON FURNACE
COMPARISON FURNACE
COMPARISON FURNACE 모델명: K12

► Peripheral wells, angled off-axis, places thermometer tips

    in close proximity, minimizing well-to-well differences while

    still leaving plenty of room for thermometer handles above

    the furnac

제품 카달로그
견적문의
제품특징
상세사양

Primarily intended for the comparison of long-stem Standard Platinum Resistance Thermometers (SPRT), the Model K12 furnace provides the best uniformity, stability and the largest operating range available. Designed for the United States Air Force primary metrology laboratory, this furnace is currently being used to calibrate USAF standards for labs throughout the world. The system provides an extremely safe, stable and uniform environment for comparison of up to seven long-stem thermometers. 

With new 32-bit ratiometric signal conditioning, the furnace performance rivals the accuracy and precision of fixed point cells across the full range from 90 to 665 °C at a fraction of the cost. In addition, the ability to compare thermometers at temperatures between the fixed points provides an additional check on your calibrations. The broad operating range-slightly beyond the Aluminum point-allows users to anneal thermometers at the recommended 5 °C above the highest calibration point. With this system, users can complete setpoint transitions in less than 90 minutes, with virtually no temperature overshoot, even in large changes.  

Interactive user interface provides convenient system control in a stand-alone configuration. Optional remote interfaces, (RS-232 or IEEE-488), allow the system to serve as an integral part of a completely automated calibration system, dramatically increasing throughput and reducing the cost of primary calibrations. 

Standard safety features include a user-adjustable primary high temperature limit to protect standards from extreme temperatures, and a fail-safe watch dog safety to prevent thermal run-away.  The system requires no laboratory ventilation system because it emits no gasses or vapors, even at the highest operating temperatures. And, unlike many similar systems, the K12 Comparison Furnace contains absolutely no asbestos products. 

System Operating Range 90°C to 665°C
Control Stability Typical +/-0.0005°C
over 15 minutes
Thermowells 7 ea. Series 600 Inconel
≈0.315" (8.0 mm) I.D.
≈16" (406 mm) deep
Power Requirements 120 Volts
8 Amps
A.C. 47-63 Hz.
Cabinet Physical Dimensions 18" (46 cm) wide
20" (51 cm) deep
36" (92 cm) high
Safety Features Adjustable primary high temperature alarm shutoff
Redundant watch dog shutoff
Emits no vapors or gasses
Contains no asbestos
목록으로