제품소개 Products
CalBench Package
CalBench Package
CalBench Package
CalBench Package 모델명: CBP-PRES3

► Pressure calibration and trainer CalBench

► 2 regulated pneumatic modules to 20 bar

► Digital gauge modules for 200 & 700 bar

► Process calibrator/multimeter/PC module

► Source/measure V, I , Ω, Hz, temperature

► Fixed & variable DC power supply modules

► Pneumatic & hydraulic calibration pumps

► Manifold, test stand, adaptors & fittings

► Electrical vacuum pump, power switch on bench

► Automated calibration using EasyCal software

► Customisable pressure ranges (pre-order)

제품 카달로그
견적문의
제품특징
상세사양

The CBP-PRES3 CalBench package is for calibrating pressure & process instrumentation. It is suitable for users that require a workstation that is easy to operate manually, but can also perform software driven calibration applications. This makes it an ideal solution for all skill levels, from technicians learning calibration, to experienced test engineers.

For pressure calibration, four high accuracy (0.02 % FS) digital gauge modules feature. For pneumatic workload two gauge modules have regulators for output adjustment and setting. These cover vacuum to 7 bar (100 psi) and 20 bar (300 psi). The 7 bar module is typically fed line pressure from plant air and vacuum from the supplied 7149 electric pump. The 20 bar module from a compressed air cylinder (not supplied).

Additional pressure calibration can be performed using the digital gauge modules for 200 bar (3000 psi) and 700 bar (10,000 psi). These are commonly utilised with the supplied benchtop pumps that feature dual outputs to connect both the module and UUT. Manifolds, test stand, adaptors and fittings are also provided.

The 8060+ module situates centrally in the console, providing source, simulation and measurement of process signals, HART communication and 24 V loop power. It features an integral multimeter, and a PC control centre with 12.1” touch screen display. Pressure control and readback applications are included. EasyCal software communicates with pressure modules, and can be used for automated calibration and test management.

목록으로